Air Intake

This month we have one of our all time best selling products. The Maf Translator and a 3" GM mas all together in one package shipped to your door. This unbeatable deal is only around for the holidays.

$50.00

An inexpensive Drop in for your 1G, many people Cut the Stock Air Can for even more Flow. 100 Million Mile Warranty and Cleanable to keep the Intake Air fresh.

$55.00

A Great filter for use with 3" GM Mas,VPC,. or other Pressure sensor device with a 3" Intake.

3" Universal Filter

A great low cost solution for those switching to a 3" GM mas, VPC or other Pressure sensor device, with an open end and vortex design these filters flow and for the price you can afford to change them out whenever.

$15.00

-Freshen Up that Filter, includes cleaner and oil, we recommend cleaning the filter every 10K for best performance.

Its an upgrade for any 90-94 Eclipse Talon Laser Turbo, and Galant VR-4's-why because it flows almost 20% more then the 1G mas. Cars can make 500 WHP using this mas. If your serious about making some power this is the way to go. This is Mas Air Sensor Only-No Harness-See Below (All Mas's are low mileage used units-Pretested and work great)

This is the Plug and 9" of wire that comes off the Mas Air sensor, This is needed to make this mas work in most 1G Swaps.

1G Maf Translator

This is the device that allows you to run the below 3" GM Mas, It makes the installation basically plug and play with only 1 wire to tap. Not only do you get a much less restrictive higher flowing Mas/Maf, but the Translator also allows you to tune fuel curves, making the need for a fuel computer for basic setups unneeded. Much easier and more useful then the 2G mas set up, also easy to reverse if you ever want to, does not require you to cut the stock plug like a 2G mas.

  $60.00

This is an excellent upgrade for the DSM community wanting to make 400+ HP, on either a 1G or 2G Eclipse/Talon. When used with the Maf Translator, it allows you to remove that restrictive karman Vortex style Mas and Replace it with this much less restrictive hot wire set-up. It can be used in either a blow threw or draw threw application. This picks up where the 2G mas falls off. (All Mas's are low mileage used units-Pretested and work great)

For use with the Maf Translator. This the same as the GM Mas above except its has a 3.5" Opening this thing is large. If you have a serious turbo 60 trim and up you may wish to consider this, already OEM on some of GM deadliest like the Z06, 5.7l Trans Ams, and more this thing flows. (All Mas's are low mileage used units-Pretested and work great)

Everyone loves the Maf Translator, and wants to vent their BOV to atmosphere, but no one can seem to find the couplers to fit on their 2-1/2" UPIC pipes, well we have them. Silicone reinforced the correct size of 2-1/2" to 3-1/4" to fit over that large 3" opening. These are very high quality sold individually order 2 to do your UPIC pipe.